โฟโต้สวิตช์แบบทรงสี่เหลี่ยม
Square Photo Switch
รุ่น MH15V
คุณลักษณะ
สวิตช์ตรวจจับการปรากฎขึ้นของวัตถุโดยอาศัยหลักการส่งและรับแสง เป็นเซ็นเซอร์ที่มีขนาดเล็ก ตัวเรือนทรงสี่เหลี่ยม
Type of Transmission | Infra-red |
---|---|
MHL15-P3336V | 1043815 |
รายละเอียด||โฟโต้สวิตช์แบบทรงสี่เหลี่ยม รุ่น MH15V
- Sensor/detection principle Photoelectric retro-reflective sensor, Standard optics
- Housing design (light emission) Cylindrical, straight
- Housing length 52.9 mm.
- Thread diameter (housing) M18 x 1
- Optical axis Axial
- Sensing range max. 0.035 m ... 5 m 1)
- Sensing range 0.035 m ... 3.5 m 1)
- Type of light Visible red light
- Light source LED 2)
- Light spot size (distance) Ø 80 mm. (3.5 m)
- Angle of dispersion Approx. 1.5°
- Wave length 650 nm
- Adjustment Fix
- PL80A.
- Average service life: 100,000 h at TU = +25 °C.
Mechanics/Electronics
Supply Voltage | 10 V DC ... 30 V DC 1) |
- Limit values.
- May not exceed or fall below Uv tolerances.
- Without load.
- Signal transit time with resistive load.
- With light/dark ratio 1:1.
- A = VS connections reverse-polarity protected.
- C = interference suppression.
- D = outputs overcurrent and short-circuit protected.
- Use at higher ambient temperatures reduce the sender LED lifetime .
- Ripple ≤ 5 Vpp 2)
- Power consumption ≤ 30 mA 3)
- Output type PNP
- Switching mode Light switching
- Signal voltage PNP HIGH/LOW Uv - (< 2,9 V) / ca. 0 V
- Output current Imax. ≤ 100 mA
- Response time ≤ 1.25 ms 4)
- Switching frequency 400 Hz 5)
- Connection type Connector M12, 4-pin
- Circuit protection A 6), C 7), D 8)
- Protection class III
- Weight 50 g
- Polarisation filter ✔
- Housing material Stainless steel V4A (1.4404, 316L) Stainless steel
- Optics material PMMA
- Enclosure rating IP 67, IP 68, IP 69K
- Ambient operating temperature –25 °C ... +55 °C 9)
- Ambient storage temperature –25 °C ... +70 °C
- UL File No. NRKH.E189383 & NRKH7.E189383
- Limit values.
- May not exceed or fall below Uv tolerances.
- Without load.
- Signal transit time with resistive load.
- With light/dark ratio 1:1.
- A = VS connections reverse-polarity protected.
- C = interference suppression.
- D = outputs overcurrent and short-circuit protected.
- Use at higher ambient temperatures reduce the sender LED lifetime .