โฟโต้สวิตช์แบบทรงสี่เหลี่ยม
Square Photo Switch
รุ่น D/BGS-DL
คุณลักษณะ
สวิตช์ตรวจจับการปรากฎขึ้นของวัตถุโดยอาศัยหลักการส่งและรับแสง เป็นเซ็นเซอร์ที่มีขนาดเล็ก สามารถนำใช้งานอุตสาหกรรมได้ทุกประเภท เช่น ตรวจนับวัตถุที่ถูกมีการเคลื่อนไหวโดยรอก,ใช้ในการกันประตูลิฟท์หนีบ,งานล้างรถหรือล้างขวด ลอกป้ายฉลาก,ตรวจนับห่อสินค้า,กำหนดรถยนต์อยู่ตรงตำแหน่งที่จะพ่นสี,ตรวจดูสินค้าว่ามีจุกฝาปิดทุกขวดหรือเช็ค ฝากล่องปิดทุกกล่องหรือไม่,ตรวจดูว่าแก้วพลาสติกคว่ำหรือหงาย เป็นต้น
รายละเอียด || โฟโต้สวิตช์แบบทรงสี่เหลี่ยม รุ่น D/BGS-DL
- Be careful not to install the sensor at the following locations, as it may otherwise malfunction.
- Where a lot of dust, vapor, or the make is present.
- Where corrosive gas is produced.
- Where water, oil or the like flies directly onto the sensor.
- Where strong vibration or shock is cased to the sensor.
- Do not use organic solvent, such as thinner, to remove contaminants from the body case, lid, and lens which are all of plastics. Using a dry rag, just wipe clean.
- When a switching regulator is to be used with a power supply, be such to ground the Frame Ground Terminal.
- Do not use the sensor is a transient state at power on.(about 100ms)
- Do not run sensor cable near a highvoltage lines, or power lines or put them together in the same raceway. This warning should be strictly observed to prevent maifunctions caused by inductive interference.
INPUT AND OUTPUT CIRCUIT DIAGRAMS
PARTS NAME
DIMENSIONS